NWA-3160 Series User’s Guide
281
APPENDIX A
Product Specifications
The following tables summarize the NWA’s hardware and firmware features.
Table 86 Hardware Specifications
Power Specification 12 V DC, 1 A
Reset button Returns all settings to their factory defaults.
Ethernet Port • Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or
full-duplex mode.
• Auto-crossover: Use either crossover or straight-through
Ethernet cables.
Power over Ethernet
(PoE)
IEEE 802.3af compliant.
Console Port One MIL-C-5015 style RS-232 console port
Antenna SMA antenna connectors, equipped by default with 2dBi omni
antenna, 60°
When facing the front of the NWA, the antenna on the right is
used by wireless LAN adaptor WLAN1, and the antenna on the left
is used by wireless LAN adaptor WLAN2.
Operation
Temperature
0 ~ 50 º C
Storage Temperature -30 ~ 60 º C
Operation Humidity 10 ~ 90 % (non-condensing)
Storage Humidity 5 ~ 95 % (non-condensing)
Dimensions 212.5mm x 138.5mm x 52mm
Distance between the
centers of wall-
mounting holes on
the device’s back.
80 mm
Screw size for wall-
mounting
6mm ~ 8mm (0.24" ~ 0.31") head width.
Table 87 Firmware Specifications
Default IP Address 192.168.1.2
Default Subnet Mask 255.255.255.0 (24 bits)
Default Password 1234
Wireless LAN Standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g
Wireless security WEP, WPA(2), WPA(2)-PSK, 802.1x
To Next Page
Loading...
