Chapter 12 Layer-2 Isolation Screen
NWA-3160 Series User’s Guide
165
12.3 Technical Reference
This section provides technical background information on the topics discussed in
this chapter.
The figure that follows illustrates two example layer-2 isolation configurations on
your NWA (A).
Figure 101 Layer-2 Isolation Example Configuration
Set This is the index number of the MAC address.
MAC Address Type the MAC addresses of the wireless client, AP, computer or router
that you want to allow the associated wireless clients to have access to
in these address fields. Type the MAC address in a valid MAC address
format (six hexadecimal character pairs, for example
12:34:56:78:9a:bc).
Description Type a name to identify this device.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
Table 45 Wireless> Layer-2 Isolation Configuration
LABEL DESCRIPTION
00:00:c5:00:00:66
00:00:c5:00:00:cc
To Next Page
Loading...
