NWA-3160 Series User’s Guide
339
APPENDIX F
How to Access and Use the CLI
This chapter introduces the command line interface (CLI).
Accessing the CLI
Use any of the following methods to access the CLI.
Console Port
You can use this method if your NWA has a console port.
1 Connect your computer to the console port on the NWA using the appropriate
cable.
2 Use terminal emulation software with the following settings:
3 Press [ENTER] to open the login screen.
Telnet
1 Connect your computer to one of the Ethernet ports.
Table 108 Default Settings for the Console Port
SETTING
DEFAULT
VALUE
Terminal Emulation VT100
Baud Rate 9600 bps
Parity None
Number of Data Bits 8
Number of Stop Bits 1
Flow Control None
To Next Page
Loading...
