ZyXEL Communications NWA-3160 - Set up Security for the Guest Profile

Chapter 3 Tutorials
NWA-3160 Series User’s Guide
46
3.3.3.1 Set Up Security for the Guest Profile
Now you need to configure the security settings to use on the guest wireless
network. Click the Security tab.
You already chose to use the security03 profile for this network, so select
security03’s entry in the list and click Edit. The following screen appears.
Figure 25 Tutorial: Guest Security Profile Edit
1 Change the Name field to “Guest_Security” to make it easier to remember and
identify.
2 Select WPA-PSK in the Security Mode field. WPA-PSK provides strong security
that is supported by most wireless clients. Even though your Guest_SSID clients
do not have access to sensitive information on the network, you should not leave
the network without security. An attacker could still cause damage to the network
or intercept unsecured communications.
3 Enter the PSK you want to use in your network in the Pre Shared Key field. In
this example, the PSK is “ThisismyGuestWPApre-sharedkey”.
4 Click Apply. The Wireless > Security screen displays. Ensure that the Profile
Name for entry 3 displays “Guest_Security” and that the Security Mode is
WPA-PSK.
Figure 26 Tutorial: Guest Security: Updated