Chapter 3 Tutorials
NWA-3160 Series User’s Guide
55
3.4.3 Set Up E-mail Logs
In this section, you will configure the first of your four APs to send a log message
to your e-mail inbox whenever a rogue AP is discovered in your wireless network’s
coverage area.
Click LOGS > Log Settings. The following screen appears.
Figure 37 Tutorial: Log Settings
1 In this example, your mail server’s IP address is 192.168.1.25. Enter this IP
address in the Mail Server field.
2 Enter a subject line for the alert e-mails in the Mail Subject field. Choose a
subject that is eye-catching and identifies the access point - in this example,
“ALERT_Access_Point_A”.
To Next Page
Loading...
