NWA-3160 Series User’s Guide
31
CHAPTER 2
The Web Configurator
2.1 Overview
This chapter describes how to access the NWA’s web configurator and provides an
overview of its screens.
2.2 Accessing the Web Configurator
1 Make sure your hardware is properly connected and prepare your computer or
computer network to connect to the NWA (refer to the Quick Start Guide).
2 Launch your web browser.
3 Type "http://192.168.1.2" as the URL (default).
4 Type "1234" (default) as the password and click Login. In some versions, the
default password appears automatically - if this is the case, click Login.
5 You should see a screen asking you to change your password (highly
recommended) as shown next. Type a new password (and retype it to confirm)
then click Apply. Alternatively, click Ignore.
Note: If you do not change the password, this screen appears every time you login.
To Next Page
Loading...
