Chapter 3 Tutorials
NWA-3160 Series User’s Guide
63
3.5.6 Checking your Settings and Testing the Configuration
Use the following sections to ensure that your wireless networks are set up
correctly.
3.5.6.1 Checking Settings
Take the following steps to check that the NWA is using the correct SSIDs, MAC
filters and layer-2 isolation profiles.
1 Click Wireless > Wireless. Check that the Operating Mode is MBSSID and
that the correct SSID profiles are selected and activated, as shown in the following
figure.
Figure 43 Tutorial: SSID Profiles Activated
Set 2 MAC Address: 99:88:77:66:55:44
Description: SERVER_2
Set 3 MAC Address: 66:55:44:33:22:11
Description: GATEWAY
MAC Filter (macfilter04) Edit Screen
Profile Name MacFilter_SERVER_2
Set 1 MAC Address: 22:33:44:55:66:77
Description: Bob
Table 7 Tutorial: SERVER_2 Network Information
To Next Page
Loading...
