Chapter 2 The Web Configurator
NWA-3160 Series User’s Guide
33
2.4 Navigating the Web Configurator
The following summarizes how to navigate the web configurator from the Status
screen.
Click LOGOUT at any time to exit the web configurator.
Check the status bar at the bottom of the screen when you click Apply or OK to
verify that the configuration has been updated.
Figure 13 The Status Screen of the Web Configurator
• Click the links on the left of the screen to configure advanced features such as
MGNT MODE (Standalone AP or Managed AP), SYSTEM (General, Password
and Time Setting), WIRELESS (Wireless, SSID, Security, RADIUS, Layer-2
Isolation, MAC Filter), IP, ROGUE AP (Configuration, Friendly AP, Rogue AP),
REMOTE MGNT (Telnet, FTP, WWW and SNMP), AUTH. SERVER (Setting,
Trusted AP, Trusted Users), CERTIFICATES (My Certificates, Trusted CAs),
LOGS (View Log and Log Settings), VLAN (Wireless VLAN and RADIUS VLAN),
Load Balancing, and DCS.
•Click MAINTENANCE to view information about your NWA or upgrade
configuration and firmware files. Maintenance features include Status
(Statistics), Association List, Channel Usage, F/W (Firmware) Upload,
Configuration (Backup, Restore and Default) and Restart.
To Next Page
Loading...
