Chapter 23 Maintenance
NWA-3160 Series User’s Guide
268
23.5 F/W Upload Screen
Use this screen to upload firmware to your NWA.
Click MAINTENANCE > F/W Upload. The following screen displays. .
Figure 172 Maintenance > F/W Upload
The following table describes the labels in this screen.
Do not turn off the NWA while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before
logging into the NWA again.
Figure 173 Firmware Upload In Process
Table 84 Maintenance > F/W Upload
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember
that you must decompress compressed (.zip) files before you can
upload them.
Upload Click Upload to begin the upload process. This process may take up
to two minutes.
To Next Page
Loading...
