Chapter 8 Wireless Screen
NWA-3160 Series User’s Guide
121
Enable Spanning
Tree Control (STP)
(R)STP (Section 8.3.5 on page 131) detects and breaks network
loops and provides backup links between switches, bridges or
routers. It allows a bridge to interact with other (R)STP -compliant
bridges in your network to ensure that only one path exists between
any two stations on the network. Select the check box to activate
STP on the NWA.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
Table 22 Wireless: Bridge / Repeater
LABEL DESCRIPTIONS
To Next Page
Loading...
