Chapter 13 MAC Filter Screen
NWA-3160 Series User’s Guide
170
The following table describes the labels in this screen.
Note: To activate MAC filtering on an SSID profile, select the correct filter from the
Enable MAC Filtering drop-down list box in the Wireless > SSID > Edit screen
and click Apply
Table 47 MAC Address Filter
LABEL DESCRIPTION
Profile Name Type a name to identify this profile.
Filter Action Define the filter action for the list of MAC addresses in the MAC
address filter table.
Select Deny Association to block access to the router. MAC
addresses not listed will be allowed to access the router.
Select Allow Association to permit access to the router. MAC
addresses not listed will be denied access to the router.
MAC Address Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the
wireless station to be allowed or denied access to the NWA.
Description Type a name to identify this wireless station.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
To Next Page
Loading...
