Chapter 20 VLAN
NWA-3160 Series User’s Guide
243
4 The Select Groups window displays. Select a remote access policy and click the
Add button. The policy is added to the field below. Only one VLAN Group should
be associated with each policy.
5 Click OK and Next in the next few screens to accept the group value.
Figure 150 Adding VLAN Group
6 When the Permissions options screen displays, select Grant remote access
permission.
6a Click Next to grant access based on group membership.
6b Click the Edit Profile button.
Figure 151 Granting Permissions and User Profile Screens
7 The Edit Dial-in Profile screen displays. Click the Authentication tab and select
the Extensible Authentication Protocol check box.
7a Select an EAP type depending on your authentication needs from the drop-
down list box.
To Next Page
Loading...
