Chapter 3 Tutorials
NWA-3160 Series User’s Guide
61
2 Select SERVER_1’s entry and click Edit. The following screen displays.
Figure 40 Tutorial: SSID Edit
Select l2Isolation03 in the L2 Isolation field, and select macfilter03 in the
MAC Filtering field. Click Apply.
3 Click the Layer-2 Isolation tab. When the Layer-2 Isolation screen appears,
select L2Isolation03’s entry and click Edit. The following screen displays.
Figure 41 Tutorial: Layer-2 Isolation Edit
4 Enter the network router’s MAC Address and add a Description (“NET_ROUTER” in
this case) in Set 1’s entry.
5 Enter server 1’s MAC Address and add a Description (“SERVER_1” in this case) in
Set 2’s entry.
6 Change the Profile Name to “L-2-ISO_SERVER_1” and click Apply. You have
restricted users on the SERVER_1 network to access only the devices with the
MAC addresses you entered.
To Next Page
Loading...
