P-660 series Support Notes
table display dns query table
server <primary> [secondary] [third] set dns server
stats
clear clear dns statistics
disp display dns statistics
table
display dns table
httpd
debug [on|off] set http debug flag
icmp
echo [on|off] set icmp echo response
flag
data <option> select general data type
status
display icmp statistic
counter
trace [on|off] turn on/off trace for
debugging
discovery <iface> [on|off] set icmp router discovery
flag
ifconfig
[iface] [ipaddr] [broadcast
<addr> |mtu
<value>|dynamic]
configure network
interface
ifdrop
<iface> chaek if iface is available.
ping
<hostid> ping remote host
pong
<hostid> [<size>
<time-interval>]
pong remote host
extping
<target address>
[-t] Continue to send
ECHO_REQ until Ctrl-C
input
[-c] Validate the reply data
[-d] [Data] Data pattern. The
maximum length of data
is 255 characters.
[-f] Set DF flag.
[-l] [Data size] Datagram size in bytes
(with 28 bytes Header).
[-v] [TOS value] Specify the value of TOS
flag.
[-n] [Repeat value] The number of times to
send ECHO_REQ packet.
[-w] [Timeout value] Specify the value of
Timeout in seconds.
[-o] [IP address/IFace] To specify one IP address
176
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
