P-660 series Support Notes
his application note explains how to establish a PPTP connection with a remote
, all PPTP packets can be
The port
T Menu 15 for P-660 to forward to
NT server.
Configuration
T
private network in the P-660 SUA case. In ZyNOS
forwarded to the internal PPTP Server (WinNT server) behind SUA.
number of the PPTP has to be entered in the SM
the appropriate private IP address of Windows
Example
0.
1. PPTP server setup (WinNT)
• Add the VPN service from Control Panel>Network
t
s for
•
The following example shows how to dial to an ISP via the P-660 and then establish a
tunnel to a private network. There will be three items that you need to set up for PPTP
application, these are PPTP server (WinNT), PPTP client (Win9x) and the P-66
• Add an user account for PPTP logged on user
• Enable RAS port
• Select the network protocols from RAS such as IPX, TCP/IP NetBEUI
• Set the Internet gateway to P-660
2. PPTP client setup (Win9x)
• Add one VPN connection from Dial-Up Networking by entering the correc
username & password and the IP address of the P-660's Internet IP addres
logging to NT RAS server.
Set the Internet gateway to the router that is connecting to ISP
3. P-660 router setup
39
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
