P-660 series Support Notes
Rem IP Addr = 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= N/A
NAT= Full Feature
Address Mapping Set= 1
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies=
Enter here to CONFIRM or ESC to CANCEL:
Step 1. Enter 11
Step 2. Move th
default No to Y
Network Laye
The following t
from the Main Menu.
e cursor to the Edit IP field, press the [SPACEBAR] to toggle the
es, then press [ENTER] to bring up Menu 11.3-Remote Node
r Options.
able describes the options for Network Address Translation.
Field Options Description
Full Feature
When you select this option the SMT will use
Address Mapping Set 1 (Menu 15.1-see later for
further discussion).
None
NAT is disabled when you select this option.
Network Address
Translation
SUA Only
e
Address Mapping Set 255 (Menu 15.1-see later for
further discussion). This option use basically
Many-to-One Overload mapping. Select Full
Feature when you require other mapping types. It
is a convenient, pre-configured, read only,
e mapping set, sufficient for most
purposes and helpful to people already familiar
with SUA in previous ZyNOS versions. Note that
there is also a Server type whose IGA is 0.0.0.0 in
When you select this option the SMT will us
Many-to-On
this set.
Table: Applying NAT in Menu 4 and Menu 11.3
45
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
