ZyXEL Communications P-660R-T1 - Page 47

P-660 series Support Notes
guring NAT
nfigure NAT, enter 15 from the Main Menu to bring up the following screen.
Confi
To co
Menu 15 - NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
Address Ma
d us to create th le used
ssign global addresses to LAN clients. Each remote node must specify which NAT
Address Ma so allows you to
in Menu 15.1. You can only configure from Set 1 to Set 8. Set 255 is used for SUA.
r correct NAT Set as
ll. When t 255.
apped to external ports. To use
-660), a server rule must be set up inside the NAT Address
ing se for further information
pping Sets and NAT Server Sets
Use the Ad
to a
ress Mapping Sets menus and submen e mapping tab
pping Set to use. The P-660 has 8 remote nodes and
NAT Address Mapping Set. You can see nine NAT Address Mapping sets configure 8
When you s
we
elect Full Feature in menu 4 or 11.3, you must ente
you select SUA Only, the SMT will use Se
The NAT S
this set (one set for the P
erver Set is a list of LAN side servers m
Mapp t. Please see NAT Server Sets on these menus.
Enter 1 to bring up Menu 15.1-Address Mapping Sets
Menu 15.1 - Address Mapping Sets
1.
2.
3.
4.
5.
6.
7.
8.
255. SUA (Read Only)
Enter Set Number to Edit:
46
All contents copyright © 2005 ZyXEL Communications Corporation.