P-660 series Support Notes
Menu 4 - Internet Access Setup
ISP's Name= CHT
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 0
VCI #= 33
ATM QoS Type= CBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= cso@hinet.net
My Password= ********
Idle Timeout (sec)= 0
IP Address Assignment= Dynamic
IP Address= N/A
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel :
From Menu 4 shown above simply choose the SUA Only option from the NAT field.
his is the Many-to-One mapping discussed earlier. The SUA read only option from
e NAT field in menu 4 and 11.3 is specifically pre-configured to handle this case.
T
th
52
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
