P-660 series Support Notes
. Internet Access with an Internal Server 2
In this case, we do exactly as above (use the co
and also go to Menu 15.2.1-NAT Server Setup (Used for SUA Only
Internet Server behind the NAT as shown in the NAT
nvenient pre-configured SUA Only set)
) to specify the
as shown below.
Menu 15.2.1 - NAT Server Setup (Used for SUA Only)
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 0.0.0.0
2. 21 21 192.168.1.33
3. 0 0 0.0.0.0
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 0 0 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
53
All contents copyright © 2005 ZyXEL Communications Corporation.
To Next Page
Loading...
