Chapter 48 Packet Flow Explore
ZyWALL USG Series User’s Guide
1020
Figure 731 Maintenance > Packet Flow Explore > Routing Status (Default WAN Trunk)
Figure 732 Maintenance > Packet Flow Explore > Routing Status (Main Route)
The following table describes the labels in this screen.
Table 416 Maintenance > Packet Flow Explore > Routing Status
LABEL DESCRIPTION
Routing Flow This section shows you the flow of how the Zyxel Device determines where to route a packet.
Click a function box to display the related settings in the Routing Table section.
Routing Table This section shows the corresponding settings according to the function box you click in the
Routing Flow section.
The following fields are available if you click Direct Route, Static-Dynamic Route, or Main Route in the Routing Flow
section.
# This field is a sequential value, and it is not associated with any entry.
Destination This is the destination IP address of a route.
Gateway This is the IP address of the next-hop gateway or the interface through which the traffic is
routed.
Interface
This is the name of an interface associated with the route.
Metric This is the route’s priority among the displayed routes.
To Next Page
Loading...
