Chapter 26 Advertisement Screen
ZyWALL USG Series User’s Guide
567
26.1.1 Adding/Editing an Advertisement URL
Click Configuration > Hotspot > Advertisement and then the Add (or Edit) icon in the Advertisement
Summary section to open the Add/Edit Advertisement URL screen. Use this screen to configure an
advertisement address entry.
Note: You can create up to 20 advertisement URL entries. The Zyxel Device randomly picks
one and open the specified web site in a new frame when an authenticated user is
attempts to access the Internet.
Figure 401 Configuration > Hotspot > Advertisement > Add/Edit
Name This field displays the descriptive name of web site.
URL This field displays the address of web site.
Hotspot Service
Status
Service Status This field displays whether a service license is enabled at myZyxel (Activated) or not (Not
Activated) or expired (Expired). It displays the remaining Grace Period if your license has
Expired. It displays Not Licensed if there isn’t a license to be activated for this service.
If you need a license or a trial license has expired, click Buy to buy a new one. If a Standard
license has expired, click Renew to extend the license.
Then, click Activate to connect with the myZyxel server to activate the new license.
Service Type This shows whether you have a trial or standard license or none (Trial, Standard, None).
Expiration
Date
This shows when your hotspot license will expire.
Register Now Click the link to go to myZyxel where you can register your Zyxel Device and activate the
service.
This link is available only when the service is not activated yet.
Apply Click this button to save your changes to the Zyxel Device.
Reset Click this button to return the screen to its last-saved settings.
Table 202 Configuration > Hotspot > Advertisement (continued)
LABEL DESCRIPTION
To Next Page
Loading...
