Chapter 7 Monitor
ZyWALL USG Series User’s Guide
239
7.26 The Printer Status Screen
This screen displays information about the connected statement printer, such as SP350E. Click Monitor >
Printer Status to display this screen.
Figure 196 Monitor > Printer Status
The following table describes the labels in this screen.
7.27 The SecuDeployer Monitor Screen
Click Monitor > Cloud CNM > SecuDeployer to view the Zyxel Device SecuDeployer client(s) managed
by the Zyxel Device SecuDeployer server. Double-click an entry to display more information about the
Zyxel Device.
Description This displays the detected device’s description. For more on managing friendly and rogue APs,
see the Configuration > Wireless > MON Mode screen.
Last Seen This indicates the last time the device was detected by the Zyxel Device.
Refresh Click this to refresh the items displayed on this page.
Table 67 Monitor > Wireless > Detected Device (continued)
LABEL DESCRIPTION
Table 68 Monitor > Printer Status
LABEL DESCRIPTION
# This is the index number of the printer in the list.
IPv4 Address This field displays the IP address of the printer that you configured in the Configuration > Hotspot
> Printer Manager > General: Add screen.
Update Time This field displays the date and time the Zyxel Device last synchronized with the printer.
This shows n/a when the printer status is sync fail.
Status This field displays whether the Zyxel Device can connect to the printer and update the printer
information.
Description This field displays the descriptive name of the printer that you configured in the Configuration >
Hotspot > Printer Manager > General: Add screen.
Nickname This field displays the nickname of the printer that you configured in the Configuration > Hotspot
> Printer Manager > General: Edit screen.
Firmware Version This field displays the model number and firmware version of the printer.
This shows n/a when the printer status is sync fail.
MAC This field displays the MAC address of the printer.
To Next Page
Loading...
