EasyManua.ls Logo

ZyXEL Communications USG40W - The Zone Screen

ZyXEL Communications USG40W
1090 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 43 Object
ZyWALL USG Series User’s Guide
795
Intra-zone Traffic
Intra-zone traffic is traffic between interfaces or VPN tunnels in the same zone. For example, in Figure
546 on page 794, traffic between VLAN 2 and the Ethernet is intra-zone traffic.
Inter-zone Traffic
Inter-zone traffic is traffic between interfaces or VPN tunnels in different zones. For example, in Figure 546
on page 794, traffic between VLAN 1 and the Internet is inter-zone traffic. This is the normal case when
zone-based security and policy settings apply.
Extra-zone Traffic
Extra-zone traffic is traffic to or from any interface or VPN tunnel that is not assigned to a zone. For
example, in Figure 546 on page 794, traffic to or from computer C is extra-zone traffic.
Some zone-based security and policy settings may apply to extra-zone traffic, especially if you can
set the zone attribute in them to Any or All. See the specific feature for more information.
43.1.2 The Zone Screen
The Zone screen provides a summary of all zones. In addition, this screen allows you to add, edit, and
remove zones. To access this screen, click Configuration > Object > Zone.
Figure 547 Configuration > Object > Zone
The following table describes the labels in this screen.
Table 291 Configuration > Object > Zone
LABEL DESCRIPTION
User Configuration /
System Default
The Zyxel Device comes with pre-configured System Default zones that you cannot
delete. You can create your own User Configuration zones
Add Click this to create a new, user-configured zone.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify
the entry’s settings.
Remove To remove a user-configured trunk, select it and click Remove. The Zyxel Device
confirms you want to remove it before doing so.
References Select an entry and click References to open a screen that shows which settings use the
entry. Click Refresh to update information in this screen.
# This field is a sequential value, and it is not associated with any interface.
Name This field displays the name of the zone.

Table of Contents

Other manuals for ZyXEL Communications USG40W

Related product manuals