ZyWALL USG Series User’s Guide
82
CHAPTER 4
Easy Mode
4.1 Overview
Easy Mode contains wizards that help you configure the Zyxel Device, links to portals and the advanced
menus in Expert Mode.
Note: See Section 1.1 on page 28 to see which models support Easy Mode wizards.
Use the Easy Mode screens if you have a relatively simple network environment with one WAN (WAN1)
and one LAN (LAN1) connections. If your Zyxel Device has two WAN ports, use WAN1 as the WAN
connection. If you use WAN2 as the WAN connection or want to use both WAN ports, then please use
the Expert Mode screens.
If you prefer to start directly with the advanced screens, then simply click Expert Mode and select
the Expert Mode option.
Figure 60 Switch Modes
Note: Enabling guest network renames the OPT or P6 port to "guest". Go to the Configuration >
Network > Interface > Port Role screen in Expert Mode to check. A guest interface is
created. The OPT port or the highest-numbered copper Ethernet port in the Zyxel
Device will be bound with the guest interface. If Device HA is used, then the second-
highest numbered port will be used instead.
4.1.1 Objects and Rules
The Zyxel Device automatically creates EZ_ objects and rules in Expert Mode for settings configured in
Easy Mode. The following table shows whether you can edit or delete the EZ_ objects and rules in the
listed screens. When creating objects and rules in Expert Mode, you cannot use "EZ_" at the beginning of
the name.
To Next Page
Loading...
