ZyXEL Communications USG40W - The Port Statistics Graph Screen

Chapter 7 Monitor
ZyWALL USG Series User’s Guide
199
7.2.1 The Port Statistics Graph Screen
Use this screen to look at a line graph of packet statistics for each physical port. To access this screen,
click Port Statistics in the Status screen and then the Switch to Graphic View Button.
Figure 168 Monitor > System Status > Port Statistics > Switch to Graphic View
The following table describes the labels in this screen.
RxPkts This field displays the number of packets received by the Zyxel Device on the physical port
since it was last connected.
Collisions This field displays the number of collisions on the physical port since it was last connected.
Tx B/s This field displays the transmission speed, in bytes per second, on the physical port in the one-
second interval before the screen updated.
Rx B/s This field displays the reception speed, in bytes per second, on the physical port in the one-
second interval before the screen updated.
Up Time This field displays how long the physical port has been connected.
System Up Time This field displays how long the Zyxel Device has been running since it last restarted or was
turned on.
Table 36 Monitor > System Status > Port Statistics (continued)
LABEL DESCRIPTION
Table 37 Monitor > System Status > Port Statistics > Switch to Graphic View
LABEL DESCRIPTION
Refresh Interval Enter how often you want this window to be automatically updated.
Refresh Now Click this to update the information in the window right away.
Port Selection Select the number of the physical port for which you want to display graphics.
Switch to Grid
View
Click this to display the port statistics as a table.