Chapter 5 Quick Setup Wizards
ZyWALL USG Series User’s Guide
152
5.2.3 Configure WAN IP Settings
Use this screen to select whether the interface should use a fixed or dynamic IP address.
Figure 120 WAN Interface Setup: Step 2 Ethernet Dynamic IP
Figure 121 WAN Interface Setup: Step 2 Ethernet Static IP
• WAN Interface: This is the interface you are configuring for Internet access.
• Zone: This is the security zone to which this interface and Internet connection belong.
• IP Address Assignment: Select Auto If your ISP did not assign you a fixed IP address.
Select Static if you have a fixed IP address and enter the IP address, subnet mask, gateway IP address
(optional) and DNS server IP address(es).
To Next Page
Loading...
