Chapter 6 Dashboard
ZyWALL USG Series User’s Guide
186
6.2.3 DHCP Table Screen
Click on the DHCP Table link to look at the IP addresses currently assigned to DHCP clients and the IP
addresses reserved for specific MAC addresses. The following screen will show.
Figure 156 Dashboard > System Status > DHCP Table
DHCP Table Click this to look at the IP addresses currently assigned to the Zyxel Device’s DHCP
clients and the IP addresses reserved for specific MAC addresses. See Section 6.2.3
on page 186.
Current Login User This field displays the user name used to log in to the current session, the amount of
reauthentication time remaining, and the amount of lease time remaining.
Number of Login Users This field displays the number of users currently logged in to the Zyxel Device. Click
the icon to pop-open a list of the users who are currently logged in to the Zyxel
Device.
Boot Status This field displays details about the Zyxel Device’s startup state.
OK - The Zyxel Device started up successfully.
Firmware update OK - A firmware update was successful.
Problematic configuration after firmware update - The application of the
configuration failed after a firmware upgrade.
System default configuration - The Zyxel Device successfully applied the system
default configuration. This occurs when the Zyxel Device starts for the first time or you
intentionally reset the Zyxel Device to the system default settings.
Fallback to lastgood configuration - The Zyxel Device was unable to apply the
startup-config.conf configuration file and fell back to the lastgood.conf
configuration file.
Fallback to system default configuration - The Zyxel Device was unable to apply the
lastgood.conf configuration file and fell back to the system default configuration file
(system-default.conf).
Booting in progress - The Zyxel Device is still applying the system configuration.
Table 24 Dashboard > System Status (continued)
LABEL DESCRIPTION
To Next Page
Loading...
