ZyXEL Communications USG40W - Page 205

Chapter 7 Monitor
ZyWALL USG Series User’s Guide
205
Figure 170 Monitor > System Status > Traffic Statistics
There is a limit on the number of records shown in the report. Please see Table 40 on page 206 for more
information. The following table describes the labels in this screen.
Table 39 Monitor > System Status > Traffic Statistics
LABEL DESCRIPTION
Data Collection
Collect Statistics Select this to have the Zyxel Device collect data for the report. If the Zyxel Device has already
been collecting data, the collection period displays to the right. The progress is not tracked
here real-time, but you can click the Refresh button to update it.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Statistics
Interface Select the interface from which to collect information. You can collect information from
Ethernet, VLAN, bridge and PPPoE/PPTP interfaces.
Sort By Select the type of report to display. Choices are:
• Host IP Address/User - displays the IP addresses or users with the most traffic and how much
traffic has been sent to and from each one.
• Service/Port - displays the most-used protocols or service ports and the amount of traffic for
each one.
• Web Site Hits - displays the most-visited Web sites and how many times each one has been
visited.
• Country - displays the countries with the most traffic and the amount of traffic for each
one.
Each type of report has different information in the report (below).
Refresh Click this button to update the report display.
Flush Data Click this button to discard all of the screen’s statistics and update the report display.
These fields are available when the Traffic Type is Host IP Address/User.
# This field is the rank of each record. The IP addresses and users are sorted by the amount of
traffic.
Direction This field indicates whether the IP address or user is sending or receiving traffic.
• Ingress- traffic is coming from the IP address or user to the Zyxel Device.
• Egress - traffic is going from the Zyxel Device to the IP address or user.