Chapter 3 Hardware, Interfaces and Zones
ZyWALL USG Series User’s Guide
73
Figure 54 USG20-VPN / USG20W-VPN Rear Panel
Figure 55 USG40 / USG40W Rear Panel
Figure 56 USG60 / USG60W Rear Panel
Figure 57 USG2200-VPN / USG2200 Rear Panel
The following table describes the items on the rear panel.
Table 14 Rear Panel Items
LABEL DESCRIPTION
Console You can use the console port to manage the Zyxel Device using CLI commands. You will be
prompted to enter your user name and password. See the Command Reference Guide for
more information about the CLI.
When configuring using the console port, you need a computer equipped with
communications software configured to the following parameters:
• Speed 115200 bps
• Data Bits 8
•Parity None
•Stop Bit 1
• Flow Control Off
Power Use the included power cord to connect the power socket to a power outlet. Turn the power
switch on if your Zyxel Device has a power switch.
Lock Attach a lock-and-cable from the Kensington lock (the small, metal-reinforced, oval hole) to a
permanent object, such as a pole, to secure the Zyxel Device in place.
Fan The fans are for cooling the Zyxel Device. Make sure they are not obstructed to allow maximum
ventilation.
To Next Page
Loading...
