ZyXEL Communications USG40W - Page 857

Chapter 43 Object
ZyWALL USG Series User’s Guide
857
Figure 594 Configuration > Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
43.9.2.2 The Recurring Schedule Add/Edit Screen
The Recurring Schedule Add/Edit screen allows you to define a recurring schedule or edit an existing
one. To access this screen, go to the Schedule screen (see Section 43.9.2 on page 855), and click either
the Add icon or an Edit icon in the Recurring section.
Table 335 Configuration > Object > Schedule > Edit (One Time)
LABEL DESCRIPTION
Configuration
Name Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores(
_), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
Date Time
StartDate Specify the year, month, and day when the schedule begins.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
StartTime Specify the hour and minute when the schedule begins.
• Hour - 0 - 23
• Minute - 0 - 59
StopDate Specify the year, month, and day when the schedule ends.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
StopTime Specify the hour and minute when the schedule ends.
• Hour - 0 - 23
• Minute - 0 - 59
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.