Chapter 2 The Web Configurator
WAP3205 v3 User’s Guide
19
Figure 4 Login Screen
5 You should see a screen asking you to change your password (highly recommended) as shown next.
Type a new password. Click Apply to save your changes. Click Ignore if you do not want to change the
password this time.
Figure 5 Change Password Screen
Note: The management session automatically times out when the time period set in the
Administrator Inactivity Timer field expires (default five minutes). Simply log back into
the WAP3205 v3 if this happens.
6 Select the setup type you want to use.
• Click Go to Wizard Setup to use the Configuration Wizard for basic Internet and Wireless setup.
• Click Go to Advanced Setup to view and configure all the WAP3205 v3’s settings.
• Select a language to go to the basic Web Configurator in that language. To change to the
advanced configurator see Chapter 11 on page 80.
To Next Page
Loading...
