Chapter 4 Modes
WAP3205 v3 User’s Guide
39
4.3.2 Universal Repeater Navigation Panel
Use the menu in the navigation panel to configure WAP3205 v3 features in Universal Repeater Mode.
The following screen and table show the features you can configure in Universal Repeater Mode.
Figure 23 Menu: Universal Repeater Mode
The following table describes the sub-menus.
Rate For the LAN ports, this displays the port speed or N/A when the line is
disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and N/A when the WLAN is disabled.
Summary
Client table Use this screen to view current client information. Click “Details...” to see the
screen.
Packet Statistics Use this screen to view port status and packet specific statistics. Click “Details...” to
see the screen.
Message Use this screen to view the status of the WAP3205 v3.
Table 14 Status Screen (Universal Repeater Mode) (continued)
LABEL DESCRIPTION
Table 15 Menu: Universal Repeater Mode
LINK TAB FUNCTION
Status This screen shows the WAP3205 v3’s general device, system and interface
status information. Use this screen to access the wizard, and summary
statistics tables.
Network
To Next Page
Loading...
