ZyXEL Communications wap3205 V3 - Status Screen (Universal Repeater Mode)

Chapter 4 Modes
WAP3205 v3 User’s Guide
37
6 A pop-up window appears providing information on this mode. Click OK in the pop-up message
window. Click Apply. Your WAP3205 v3 is now in Universal Repeater mode.
Note: Wait while the WAP3205 v3 restarts, then log in to the Web Configurator again.
4.3.1 Status Screen (Universal Repeater Mode)
Click on Status. The screen below shows the status screen in Universal Repeater mode.
Figure 22 Status Screen (Universal Repeater Mode)