ZyXEL Communications wap3205 V3 - Universal Repeater Navigation Panel

Chapter 4 Modes
WAP3205 v3 User’s Guide
42
The following table describes the labels shown in the Status screen.
4.4.2 Universal Repeater Navigation Panel
Use the menu in the navigation panel to configure WAP3205 v3 features in Client Bridge Mode.
The following screen and table show the features you can configure in Client Bridge Mode.
Table 16 Status Screen (Client Bridge Mode)
LABEL DESCRIPTION
Device Information
System Name This is the System Name you enter in the Maintenance > System > General screen.
It is for identification purposes.
Firmware Version This is the current firmware version of the WAP3205 v3.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP Server This shows the status of the LAN port’s DHCP server.
WLAN STA Information
- SSID This is the name of the selected AP that the WAP3205 v3 is associating with.
- Security Mode This shows the wireless security the WAP3205 v3 is using to connect to the AP.
- Connection Status This shows whether the WAP3205 v3 is currently associated with the selected AP.
System Status
Operation Mode This field shows the device operating mode: Access Point, Universal Repeater or
Client Bridge.
System Up Time This is the total time the WAP3205 v3 has been on.
Current Date/Time This field displays your WAP3205 v3’s present date and time.
Interface Status
Interface This displays the WAP3205 v3 port types.
Status For the LAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
Rate For the LAN ports, this displays the port speed or N/A when the line is
disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and N/A when the WLAN is disabled.
Summary
Client Table Use this screen to view information of the client that is currently connected to the
WAP3205 v3’s Ethernet LAN port.
Packet Statistics Use this screen to view port status and packet specific statistics.