WAP3205 v3 User’s Guide
21
CHAPTER 3
Connection Wizard
3.1 Overview
This chapter provides information on the wizard setup screens in the Web Configurator.
The Web Configurator’s wizard setup helps you configure your device to access the Internet. Leave a
field blank if you don’t have that information.
3.2 Accessing the Wizard
1 After you access the WAP3205 v3 Web Configurator, click Go to Wizard setup.
Figure 7 Select Go to Wizard setup
3.3 Choosing a System Operation Mode
The WAP3205 v3 offers three different system operation modes: Access Point mode, Universal Repeater
mode and Client Bridge mode. To learn more about each mode refer to Chapter 4 on page 32. When
you click on the Wizard Setup the following screen opens.
To Next Page
Loading...
