ZyXEL Communications wap3205 V3 - Back to Factory Defaults; Restart Screen

Chapter 10 Tools
WAP3205 v3 User’s Guide
79
10.4.3 Back to Factory Defaults
Pressing the Reset to default button in this section clears all user-entered configuration information and
returns the WAP3205 v3 to its factory defaults.
You can also press the WPS/RESET button on the rear panel to reset the factory defaults of your WAP3205
v3. Refer to Section 1.4.1 on page 12 for more information on the WPS/RESET button.
10.5 Restart Screen
System restart allows you to reboot the WAP3205 v3 without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the WAP3205 v3 reboot. This does not affect
the WAP3205 v3's configuration.
Figure 62 Maintenance > Tools > Restart