Chapter 3 Connection Wizard
WAP3205 v3 User’s Guide
27
The following table describes the labels in this screen.
3.5.4 Device Information
After connecting to an AP and configuring the WAP3205 v3’s wireless LAN, the following screen will
open, providing detailed information about your device.
Table 8 Connection Wizard - Universal Repeater> WLAN Information
LABEL DESCRIPTION
WLAN STA Information
SSID This is the name of the selected AP the WAP3205 v3 is associating with.
Security Mode This shows the type of security configured on the wireless device.
Operating Channel This shows the channel the WAP3205 v3 is using to connect to the wireless
device.
WLAN AP Information
802.11 Mode Select the wireless standard the WAP3205 v3’s wireless LAN uses.
Name (SSID) Type the descriptive name used to identify the WAP3205 v3 in the wireless
LAN.
Security
Security Mode Select the data encryption method the WAP3205 v3 uses for wireless
connection. Choose WPA2-PSK (AES) security to configure a Pre-Shared
Key in the box below.
Pre-Shared Key Enter the password that lets you connect to the WAP3205 v3. Your
password should be in a string of ASCII characters between 8 and 63 or
hexadecimal characters between 8 and 64.
Apply Click Apply to save the changes to your WAP3205 v3.
Reset Click Reset to reload the previous configuration of this screen.
To Next Page
Loading...
