Chapter 5 Tutorials
WAP3205 v3 User’s Guide
49
Figure 30 Tutorial: Status Screen
5.4.1 Configure Your Wireless Client
Note: We use the Zyxel M-302 wireless adapter utility screens as an example for the wireless
client. The screens may vary for different models.
1 The WAP3205 v3 supports IEEE 802.11b, IEEE 802.11g and IEEE 802.11n wireless clients. Make sure that your
notebook or computer’s wireless adapter supports one of these standards.
2 Wireless adapters come with software sometimes called a “utility” that you install on your computer. See
your wireless adapter’s User’s Guide for information on how to do that.
3 After you’ve installed the utility, open it. If you cannot see your utility’s icon on your screen, go to Start >
Programs and click on your utility in the list of programs that appears. The utility displays a list of APs
within range, as shown in the example screen below.
4 Select SSID_Example3 and click Connect.
To Next Page
Loading...
