ZyXEL Communications wap3205 V3 - Page 38

Chapter 4 Modes
WAP3205 v3 User’s Guide
38
The following table describes the labels shown in the Status screen.
Table 14 Status Screen (Universal Repeater Mode)
LABEL DESCRIPTION
Device Information
System Name This is the System Name you enter in the Maintenance > System > General screen.
It is for identification purposes.
Firmware Version This is the current firmware version of the WAP3205 v3.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP Server This shows the LAN port’s DHCP server.
WLAN AP Information
- MAC Address This shows the wireless adapter MAC Address of your device.
- Status This shows the current status of the Wireless LAN - Enabled or Disabled.
- Name (SSID) This shows a descriptive SSID name used to identify the WAP3205 v3 in the wireless
LAN.
- Channel This shows the channel number which you select manually or Auto when the
WAP3205 v3 automatically scans and selects the Wireless LAN’s channel.
- Operating Channel This shows the current channel number the WAP3205 v3 uses over the Wireless LAN.
- Security Mode This shows the data encryption method the WAP3205 v3 uses for the wireless
connection.
- 802.11 Mode This shows the IEEE 802.11 standard that the WAP3205 v3 supports. Wireless clients
must support the same standard in order to be able to connect to the WAP3205
v3.
- WPS This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
WLAN STA Information
- SSID This is the name of the selected AP that the WAP3205 v3 is associating with.
- Security Mode This shows the wireless security the WAP3205 v3 is using to connect to the wireless
device.
- Connection Status This shows whether the WAP3205 v3 is currently associated with the selected AP.
System Status
Operation Mode This field shows the device operating mode: Access Point, Universal Repeater or
Client Bridge.
System Up Time This is the total time the WAP3205 v3 has been on.
Current Date/Time This field displays your WAP3205 v3’s present date and time.
Interface Status
Interface This displays the WAP3205 v3 port types.
Status For the LAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.