Chapter 13 Troubleshooting
WAP3205 v3 User’s Guide
87
1 Make sure the wireless LAN is enabled on the WAP3205 v3.
2 Make sure the wireless adapter on the wireless station is working properly.
3 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the
same wireless standard as the WAP3205 v3.
4 Make sure your computer (with a wireless adapter installed) is within the transmission range of the
WAP3205 v3.
5 Check that both the WAP3205 v3 and your wireless station are using the same wireless and wireless
security settings.
6 Make sure traffic between the WLAN and the LAN is not blocked by the firewall on the WAP3205 v3.
7 Make sure you allow the WAP3205 v3 to be remotely accessed through the WLAN interface. Check your
remote management settings.
•See Chapter 6 Wireless LAN for more information.
To Next Page
Loading...
