2N IP Verso - Page 208

Installation manual 2N® IP Verso
208 / 241
•
•

Nametag Placing
Every intercom package includes a piece of transparent foil, which can be laser printed. Cut the
printed foil and insert the nametags in the buttons.
We recommend you to use separate foil for every button in the 5-button module.Refer to
section downloadfor the nametag printing template.
Nametag dimensions for 5-button module:
1 button: 52.0 (W) x 15.2 (H) mm (dimensional tolerance: +0; -0.5 mm)
5 buttons: 57.5 (W) x 89.0 (H) mm (dimensional tolerance: +0; -0.5 mm)
Infopanel nametag dimensions: 69.2 (W) x 86.7 (H) mm (dimensional tolerance: +0; -0.5 mm).