2N IP Verso - Page 63

Installation manual 2N® IP Verso
63 / 241
•
•
•
•
•
Surface mounting
concrete and steel structures, entry barrier columns, interior, etc.
What you need for mounting:
2N
®
IP Verso plus the respective frames
1 module: frame Part No. 9155021
2 modules: frame Part No. 9155022
3 modules: frame Part No. 9155023
Backplates (Part Nos. 9155061–9155067) are required for metal, glass
and plasterboard surfaces as well as other uneven surfaces depending
on the count of modules.
• The recommended standard installation height is 1350 mm from the ground to the
device camera level. The installation height may vary depending on the device use.
