3Com 5500-EI PWR - Page 523

1-2
To do… Use the command… Remarks
Customize the Web
authentication pages
web-authentication
customize { corp-name
corporation-text | email
email-string | phone-num
phonenum-string |
platform-name platform-text |
file web-file }
Optional
By default, there is no
customized information on Web
authentication pages.
Set the IP address and port
number of the Web
authentication server
web-authentication
web-server ip ip-address
[ port port-number ]
Required
If no port number is specified,
port 80 will be used.
No Web authentication server
is set by default.
Enable Web authentication
globally
web-authentication enable
Required
Disabled globally by default
interface interface-type
interface-number
web-authentication select
method { shared |
designated }
Enable Web authentication on
a port
quit
Required
Disabled on port by default
Set a free IP address range that
can be accessed by users
before Web authentication
web-authentication free-ip
ip-address { mask-length |
mask }
Optional
No such address range by
default
Set an authentication-free user
web-authentication free-user
ip ip-address mac
mac-address
Optional
No such user by default
Forcibly log out the specified or
all users.
web-authentication cut
connection { all | mac
mac-address | user-name
user-name | interface
interface-type
interface-number }
Optional
Set the idle user checking
interval for Web authentication
web-authentication timer
idle-cut timer
Optional
900 seconds by default
Set the maximum online time
for Web authentication users
web-authentication timer
max-online timer
Optional
1800 seconds by default
Set the maximum number of
online Web authentication
users on a port
web-authentication
max-connection number
Optional
128 users by default