3Com 5500-EI PWR - Configuring IGMP Snooping; Enabling IGMP Snooping

5
Configuring IGMP Snooping
Complete the following tasks to configure IGMP Snooping:
Task Remarks
Enabling IGMP Snooping Required
Configuring the Version of IGMP Snooping Optional
Configuring Timers Optional
Configuring Fast Leave Processing Optional
Configuring a Multicast Group Filter Optional
Configuring the Maximum Number of Multicast Groups on a Port Optional
Configuring IGMP Snooping Querier Optional
Suppressing Flooding of Unknown Multicast Traffic in a VLAN Optional
Configuring Static Member Port for a Multicast Group Optional
Configuring a Static Router Port Optional
Disabling a Port from Becoming a Router Port Optional
Configuring a Port as a Simulated Group Member Optional
Configuring a VLAN Tag for Query Message Optional
Configuring Multicast VLAN Optional
Enabling IGMP Snooping
Follow these steps to enable IGMP Snooping:
To do... Use the command... Remarks
Enter system view
system-view
—
Enable IGMP Snooping
globally
igmp-snooping enable
Required
By default, IGMP Snooping is disabled
globally.
Enter VLAN view
vlan vlan-id
—
Enable IGMP Snooping
on the VLAN
igmp-snooping enable
Required
By default, IGMP Snooping is disabled
on all the VLANs.