1-30
Displaying and Maintaining QoS
To do… Use the command… Remarks
Display the mapping between
802.1p priority and local
precedence
display qos
cos-local-precedence-map
Display the priority marking
configuration
display qos-interface
{ interface-type interface-number |
unit-id } traffic-priority
Display the protocol packet priority
configuration
display protocol-priority
Display line rate configuration
display qos-interface
{ interface-type interface-number |
unit-id } line-rate
Display traffic policing
configuration
display qos-interface
{ interface-type interface-number |
unit-id } traffic-limit
Display traffic redirecting
configuration
display qos-interface
{ interface-type interface-number |
unit-id } traffic-redirect
Display VLAN mapping
configuration
display qos-interface
{ interface-type interface-number |
unit-id } traffic-remark-vlanid
Display queue scheduling
configuration
display queue-scheduler
Display traffic accounting
configuration
display qos-interface
{ interface-type interface-number |
unit-id } traffic-statistic
Display traffic mirroring
configuration
display qos-interface
{ interface-type interface-number |
unit-id } mirrored-to
Display all the QoS configuration
display qos-interface
{ interface-type interface-number |
unit-id } all
Available in
any view
QoS Configuration Examples
Configuration Example of Traffic policing and Line Rate
Network requirement
An enterprise network connects all the departments through an Ethernet switch. PC 1, with
the IP address 192.168.0.1 belongs to the R&D department and is connected to Ethernet
1/0/1 of the switch. The marketing department is connected to Ethernet 1/0/2 of the switch.
Configure traffic policing and line rate to satisfy the following requirements:
To Next Page
Loading...
