3Com 5500-EI PWR - AAA Configuration Examples; Displaying and Maintaining HWTACACS Protocol Configuration; Displaying and Maintaining RADIUS Protocol Configuration; Remote RADIUS Authentication of Telnet;Ssh Users

2-26
Displaying and Maintaining RADIUS Protocol Configuration
To do… Use the command… Remarks
Display RADIUS message
statistics about local RADIUS
server
display local-server statistics
Display configuration information
about one specific or all RADIUS
schemes
display radius scheme
[ radius-scheme-name ]
Display RADIUS message
statistics
display radius statistics
Display buffered non-response
stop-accounting requests
display stop-accounting-buffer
{ radius-scheme radius-scheme-name |
session-id session-id | time-range start-time
stop-time | user-name user-name }
Available in
any view
Delete buffered non-response
stop-accounting requests
reset stop-accounting-buffer
{ radius-scheme radius-scheme-name |
session-id session-id | time-range start-time
stop-time | user-name user-name }
Clear RADIUS message statistics
reset radius statistics
Available in
user view
Displaying and Maintaining HWTACACS Protocol Configuration
To do… Use the command… Remarks
Display the configuration or
statistic information about one
specific or all HWTACACS
schemes
display hwtacacs
[ hwtacacs-scheme-name [ statistics ] ]
Display buffered
non-response
stop-accounting requests
display stop-accounting-buffer
{ hwtacacs-scheme
hwtacacs-scheme-name
Available in any
view
Clear HWTACACS message
statistics
reset hwtacacs statistics { accounting |
authentication | authorization | all }
Delete buffered non-response
stop-accounting requests
reset stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
Available in user
view
AAA Configuration Examples
Remote RADIUS Authentication of Telnet/SSH Users
The configuration procedure for remote authentication of SSH users by RADIUS server is similar to that
for Telnet users. The following text only takes Telnet users as example to describe the configuration
procedure for remote authentication.