Print Plate Calibration
MOVE JETS allows the user to manually move the print jets in the X and Y directions.
LEVEL PLATE is a utility that assists in leveling the print pad to the print jets.
Print Jet Calibration
CONTROL JETS allows the user to test the operation of the extruders and print jets.
OFFSET JETS is a utility that defines the parameters of the space between the print jets.
CAUTION: Do not change any of the values in the OFFSET JETS utility unless advised to
do so by Cubify Support. Any changes will alter the print quality of your creations.
Network
The Network menu allows the user to connect to a wireless network or to an ad hoc device.
System
SELECT LANGUAGE allows the user to localize the printer to their language.
LIGHT allows the user to turn on or off the print jet LEDs. The other interior LEDs are managed by the
firmware when the CubePro is powered on.
Advanced
Selecting the FIRMWARE icon allows the user to update their firmware either with a file downloaded to a
USB mass storage device or by wireless connection.
By selecting INFO, the printer will display the printer status including the serial number, the print jet
To Next Page
Loading...
Need help?
General
