3D Systems CubePro 3D Printer User Manual

Select Move Model.4.
Select the support you would like to move and drag it into position.5.
NOTE: It may be helpful to zoom in to the image before positioning the supports.
Move each support into position. When finished, select Move Model to deselect it.6.
Ensure your color has been assigned and select Build.7.
Select INF from the Support Material drop down menu. Then, select Build.8.
Save the file to your desired location.9.

3D Systems CubePro 3D Printer Specifications

General

Brand	3D Systems
Model	CubePro 3D Printer
Category	3D Printers
Language	English