3D Systems CubePro 3D Printer User Manual

Once you have finished, reduce the target speed to 0.0 RPM and the target temperature to 0.0°C. You can now select the next print jet and follow this5.
procedure if necessary.
NOTE: Pressing the values twice for target temperature and speed should change the
values to 0.0.
For further troubleshooting, contact Cubify Support at cubifysupport@cubify.com.

3D Systems CubePro 3D Printer Specifications

General

Brand	3D Systems
Model	CubePro 3D Printer
Category	3D Printers
Language	English