SAFETY SYMBOLS AND DEFINITIONS
SAFETY GUIDELINES
• Follow all safety rules in this section and observe all cautions and warnings in this guide.
• Do not modify any safety features or make modications to the CubeX. Doing so is prohibited and voids the warranty.
• Use of print materials other than genuine 3D Systems components may void the warranty.
• Adult supervision is required; observe children closely and intervene as necessary to prevent potential safety problems and
ensure the CubeX’s appropriate use. Ensure small 3D prints are not accessible to young children. 3D prints are potential choking
hazards for young children.
• When the CubeX is operating, the tip of the material dispenser (Print Jet) becomes hot; avoid touching this area until it has
cooled down.
!
Hot Surface Hazard: A hot surface is accessible in the vicinity of this sign or at the Print Jet; avoid contact. Hot
surfaces can cause severe burns.
Caution: Indicates something may happen that could cause loss of data, damage to equipment, or could cause
personal injury.
Caution: Indicates a pinch point hazard that could cause person injury.
IMPORTANT SAFETY INFORMATION
4
To Next Page
Loading...
Need help?
General
